products / push/pull solenoids

(Small) "Push-Pull" solenoids are the most robust series of linear solenoids and are therefore the best option for heavy duty applications. Their intelligent magnetic concept allows a very high holding force at a comparably low power input. This makes them ideally suited for applications asking for low power consumption or low heat dissipation.

There are Small "Push Pull" and "Push Pull" solenoids; the difference between the two versions is the size and the mounting (small push pull solenoids have threaded holes in the base plate, push pull solenoids have mounting studs).

The following bascial properties describe push pull solenoids:

• stroke up to 30mm (depending on model)
• holding force up to 2000N
• high life expectancy: up to 50 million cycles and more
• fast response time: switching times <5ms possible (depending on size and load)
• standard versions from 11mm to 87mm diameter

"Small Push/Pull" Solenoids
Model	stroke mm	Holding Force N		Dimensions mm	weight g		Data- sheet	Drawing 3D
		10% ED*	100% ED*	D x H	overall	plunger	.pdf	.igs
110C	2	4.5	1.5	11 x 13	7	1
141C	3	15	5	14 x 14	12	2.5
144C	5	12	6	14 x 21	18	3
190C	4	15	5.5	19 x 13	20	4
192C	4	20	10	19 x 18	27	4.5
194C	5	25	18	19 x 27	44	9
221C	5	23	12	22 x 18	39	9
224C	6	35	21	22 x 28	63	12
251C	5	35	15	25 x 16	47	11
300C	5	45	18	30 x 15	58	16
304C	5	55	32	30 x 21	79	15

Small Push/Pull Solenoids Selection of Push Pull solenoids

"Push/Pull" Solenoids
Model	stroke mm	Holding Force N		Dimensions mm	weight g		Data- sheet	Drawing 3D
		10% ED*	100% ED*	D x H	overall	plunger	.pdf	.igs
191C	4	18	10	19 x 13	22	4
191F	3	40	17	19 x 13	22	4
250C	5	31	16	25 x 16	47	11
250F	3	62	22	25 x 16	47	9
301C	6	60	30	30 x 15	56	16
301F	3	140	60	30 x 15	56	14
341C	6	80	40	34 x 18	97	23
341F	3	200	120	34 x 18	97	16
401C	6	110	60	41 x 22	200	60
401F	3	300	190	41 x 22	200	40
490F	3	490	300	49 x 23	250	56
491C	6	190	100	49 x 28	265	56
491F	3	490	320	49 x 28	265	60
590C	12	310	200	59 x 30	506	120
590F	6	750	500	59 x 30	506	95
591C	12	320	200	59 x 36	620	145
591F	6	780	550	59 x 36	620	140
700C	12	500	300	70 x 38	1,013	268
700F	10	1,000	650	70 x 38	1,013	285
870C	14	850	500	87 x 47	1,885	495
870F	10	2,000	1,200	87 x 47	1,885	480
874C	30	950	650	87 x 82	3,000	500
874F	14	2,000	1,400	87 x 82	3,000	535

Push/Pull Solenoids Selection of Push Pull solenoids