Geeplus Europe Limited
We specialise in design and supply of advanced
actuation devices for your next generation products.

Hybrid Stepper Motors

The DSMH series of stepper motors are high torque stepper motors for microstepping operation; they come in 7 sizes ranging from 20 to 110mm flange

The DSMH series stepper motors come up with a robust design with high qualitiy ball bearings and offer a great flexibility regarding winding design and mechanical modification!

products / hybrid stepping motors

The DSMH series of stepper motor are high torque stepper motors for microstepping operation which achieve high efficiency by new lamination design which produces torque typically 50 - 100% greater than round body designs.

The high rigidity of the laminations also helps to reduce audible noise.

The most important characteristics of our Stepper Motors are:

  • flexibility: The DSMH series comes in 7 sizes ranging from 20 to 110mm flange.
  • high speed: the high torque of the DSMH stepper motors allows for high acceleration. Low resistance windings allow for high speed.
  • high torque: typikcally 40% more troque compared to conventional motors of similar size.
  • high efficiency: the lamination design and the small airgap of the DSMH series reduce the electromagnetical losses to a minimum.
  • low noise and vibration: the rectangular lamination design leads to a high stiffness of the DSMH series stepper motors. The tooth geometry was especially designed to minimise audible noise and vibration.
  • many options as standard: metric or SAE threads, shaft on either side, return spring, dust cover, tapped holes in armature plate
  • Connectivity: Most motors of the DSMH-family provide 8 leads. This allows both for serial and parallel connection in bipolar operation and also unipolar connection.
  • customised solutions available, e.g. custom windings or custom shaft configurations

DSMH stepper motor
Type
winding
resistance*
winding
inductance*
nominal
current*
holding
torque
detent
torque
rotor
inertia
mass
Data-
sheet
Drawing
3D
 
Ohm
mH
A
Nm
Nm
kg.mm²
kg
.pdf
.zip
DSM2030H-14060
6.5
1.7
0.6
0.06
DSM2033H-14060
6.5
1.7
0.6
0.06
DSM2832H-16065
2.8
1.0
0.65
0.06
0.9
0.11
DSM2845H-16065
3.4
1.2
0.65
0.09
1.2
0.14
DSM2851H-16065
4.6
1.4
0.65
0.11
1.8
0.20
DSM3526H-14080
4.0
2.3
0.80
0.05
1.0
0.15
DSM3526H-16040
4.0
2.3
0.40
0.05
1.0
0.15
DSM3536H-14100
2.8
1.00
0.10
DSM4234H-x4040
30.0
32
0.40
0.25
0.02
2.4
0.20
DSM4234H-14150
1.3
1.3
1.50
0.21
0.02
2.4
0.20
DSM4239H-14170
1.5
3.2
1.70
0.44
0.02
3.2
0.24
DSM4248H-x8085
3.0
2.3
0.85
0.48
0.03
4.0
0.29
DSM5741H-x8070
5.0
35
0.70
0.55
0.03
12
0.50
DSM5750H-x8075
5.0
30
0.75
0.80
0.03
15
0.65
DSM5755H-x8200
0.7
3.0
2.00
1.15
0.04
28
0.75
DSM5776H-x8100
4.0
12.0
1.00
1.85
0.08
44
1.15
DSM5776H-x8200
1.0
4.0
2.00
1.85
0.08
44
1.15
DSM57115H-18300
0.7
2.0
3.00
2.7
0.15
69
1.75
DSM8665H-18220
1.50
4.1
2.20
2.9
100
2.0
DSM8680H-18275
0.95
4.0
2.75
4.5
140
2.3
DSM86118H-18300
1.40
7.4
3.00
8.5
270
3.8
DSM86156H-18310
1.70
9.7
3.10
12.0
400
5.4
DSM11099H-18275
0.90
12.5
2.75
11.5
550
5.0
DSM110150H-18325
0.72
12.8
3.25
21.0
1,090
8.4


DSMH Stepper Motors Catalogue Part

geeplus electromechanical solutions

Home / About / Products / Jobs / Press / News / Contact / Imprint
Geeplus Europe Ltd Unit C, Triple Two Centre, Tannery Close, Beckenham, BR3 4BY, UK
Tel: +44(0)208 6567788 Fax: +44(0)208 6564274 Email: info@geeplus.biz
©GeePlus Holding 2010 web site design Sarah Medway