products / 3 position solenoids

Linear solenoids with 3 positions (available as Open Frame Solenoids or Tubular Solenoids):

The most important characteristics of our Three Position Solenoids are:

• stroke up to +/-5mm (depending on type)
• neutral position in center position by spring mechanism (standard)
• one coil per direction of operation
• all three positions mechanically stable due to endstop mechanisms (also the center position!)
• life time >200,000 cycles
• available sizes: from 10 x 12 x 24mm (open frame) to 31,8 x 70mm (tubular)

3 Position Solenoids Catalogue Part