products / tubular solenoids/ super stroke solenoids

Tubular solenoids provide a fairly flat force stroke characteristics due to their tubular shape and their plunger geometry; they are well suited for applications asking for long strokes but not highest forces.

The most important characteristics of our Tubular Solenoids are:

stroke up to 30mm (depending on type)
optimised for long strokes
holding force up to 80N (in endposition, energised)
high life time: up to >30 million cycles
pull and push versions
custom versions available, including latching types (permanent magnet)

Model	stroke mm	Holding Force N		Dimensions mm	weight g		Data- sheet	Drawing 3D
-L = pull -H = push		10% ED*	100% ED*	D x H	overall	plunger pull / push	.pdf	.igs
133-L	3	5	0.9	13 x 12	15	4
133-H	3	5	0.9	13 x 12	15	2
130-L	12	7	3	13 x 27	24	5
130-H	12	7	3	13 x 27	24	4
170-L	12	7	3.5	17 x 27	15	5
170-H	12	7	3.5	17 x 27	15	4
190-L	13	18	8	19 x 40	82	20
190-H	13	18	8	19 x 40	82	16
253-L	12	35	15	25 x 30	125	32
253-H	12	35	15	25 x 30	125	19
250-L	14	38	22	25 x 51	188	44
250-H	14	38	22	25 x 51	188	35
320-L	18	70	35	32 x 58	299	54
320-H	18	70	35	32 x 58	299	53
380-L	30	80	55	38 x 64	497	95

xxx-L = pull, xxx-H = push
ED is duty cycle as a %-value, the additional limitation is the max. on time per cycle!

Tubular Solenoids General Information

The Super Stroke Solenoid is a development of the tubular design with a modified pole-piece enabling longer stroke. The longer stroke and linear force characteristic make these suitable as a replacement for small air cylinders in many applications. The Super Stroke Solenoid can be used as a proportional device (see proportional solenoids data for an explanation of proportional operation) for proportional force or position control.

The most important characteristics of our Super Stroke Solenoids are:

stroke up to 35mm (depending on type)
optimised for force characteristics strokes
holding force up to 24N (in endposition, energised)
life time: up to >2 million cycles

Model	stroke mm	Holding Force N		Dimensions mm	weight g		Data- sheet	Drawing 3D
		10% ED*	100% ED*	D x H	overall	plunger pull / push	.pdf	.igs
M190SS-XXv	20	5	0.9	13 x 12	15	4
M250SS	24	5	0.9	13 x 12	15	2
M320SS	32	7	3	13 x 27	24	5
M380SS-XXv	35	7	3	13 x 27	24	4

Super Stroke Solenoids General Information

Otherwise refer to Proportional solenoids

Home / About / Products / Jobs / Press / News / Contact / Imprint
Geeplus Europe Ltd Unit C, Triple Two Centre, Tannery Close, Beckenham, BR3 4BY, UK
Tel: +44(0)208 6567788 Fax: +44(0)208 6564274 Email: info@geeplus.biz
©GeePlus Holding 2010 web site design Sarah Medway